Wellton Healthcare Baby Transport Incubator Deluxe WH-1893

Wellton Healthcare Baby Transport Incubator Deluxe WH-1893

Specification :-

Control Panel : The Control Panel Features A Display Which Is Easy Reading At Any Angle During Transportation. Display For Air Temperature And Skin Temperature Helps To Maintain, Control And Provide Essential Information About The Infant’s Thermal Support. Microprocessor Controlled System Has Air And Skin Modes For Operation. Display Shows Both Temperatures. Air Or Skin Temp Along With Set Temp. Soft Touch Operation Comes With Digital Display And Extensive Alarms.

Power Source : Baby Transport Incubator  Operates On AC Or DC Power Using AC When Available Or Switching To Its Internal Battery When Necessary

Battery :

• The Batteries Used In The System Are 12 Volt 18ah. Sealed Maintenance Free VRLA Batteries.
• The Charge Time Is 8-10 Hrs. Per Battery From Full Discharge.
• Double Wall Head Hood 
• Chassis Body : Plastic (Fibre) For Shock Proof The System

Alarms:

• Skin Temp  Low / High  • Probe Failure   • Low Battery   

• Power Failure • System Failure  • Timer

• In Case Of High Temperature. Above 38 Degree C, Heater Automatically Cuts Off To Ensure Baby’s Safety. 
• Baby Transport Incubator Can Be Used On Manual Mode As Well. 

Standard Features:

• Double Wall Hood • Skin Temperature Probe / Air Temp. Probe  

• 2 Access Doors  •  1 Baby Belt • Collapsible Trolley 

Optional

• Examination Lamp • 2 Disposable Infant Restraint Straps 

• 1 Iris Port  • 6 Tubing Ports • Accessory Shelf • Suction, Oxygen Cylinder, Pressure Regulatory Assembly,

• Flow Meter, Remote Controlled Movement Of The Trolley.

Collapsible Stainless Steel Stand:

• With 2/4 no. Gas Springs For Ambulance And In Hospital Transport Purposes. Gas Spring System Allow The Stand To Collapse When The Lever Is Pulled And Trolley Is Pressed From Both The Sides.
• Control Displays
• Battery Condition Status  : Single Led Indication Of Low Battery 
•                                                 Condition On The Side Panel
• Power Mode                        : Illuminates AC, DC Or External DC 
• Air/Baby Temp °C               : Displays Incubator Air Temp / Baby Temperature
• Performance Characteristics 
• Temperature Set Range    : 32 Degree C -  39 Degree C
• Temp Variability                 : 1.0 Degree C
• Temp Uniformity                : 1.0 Degree C
• Air Filter                               : Removes Airborne Particles & Dust
• Easy  Access                        : Quick And Easy Access Through The Side Access Door And Front Port Holes. The Side Door Folds Down And The Matteress Retracts Out  From The Hood To Access For  Emergency Procedures. The Door And Tubing Ports  Offer Ventilator Tubing Support .
• Infant Restraint Strap Is Attached To The Baby Bed.
• Dimensions In Inches (Approx)
• Height Without Hood                             : 98cm 
• In Collapsible Stand Mode                    : 72cm 
• Hood                                                         : 122cm Width  : 57cm Length  : 132cm
• Baby bed                                                  : 50 x 27cm
• Weight                                                      : 75kg 
• Backup                                                     : 60-90mns 
• Size Of Castors                                       : 12.5cm PU
• Sealed Maintenance Free Battery       : VRLA Batteries Charge Time : 10hrs.(Approx.)